Local Business Directory Local Events Local Community Map Register for Courses Online
 

1.        How is plywood made?
2. When was plywood first developed and what is some background history?
3. How much does a sheet of plywood weigh?
4. What is the difference between Luan Plywood and regular good-one-side plywood?
5. What type of wood and sizes do you offer for scroll saw hobbyists?
6. What material would you suggest for the top of a shop work bench? And what thickness?

 

1.     How is plywood made?
Plywood is composed of many layers, which are called plies or veneers.
The plies are created from two processes:

•   The first is rotary cut - a log is spun on a roller and a big knife peels off the skin of the log. (Just like peeling an apple).
•   The other is flat sliced - the log is sliced into long thin slices lengthwise. (Just like slicing a carrot from head to bottom)

The plies are then sandwiched together with a resin (glue) and pressed with enormous pressure. The plywood is then cut into standard 4’ x 8’ lengths. Sometimes, depending on the customer needs the sheets can be as big as 4’ by 20’ long. If the plywood has more plies, such as, baltic birch plywood, it makes it very stable.

There are also many types of plywood, including:

•   Cabinet grade - for making kitchen cabinets, furniture, woodworking projects, etc.
•   Sheathing - used for siding on homes.
•   Marine plywood - has a waterproof resin so it can be used for boats and exterior uses.

Plywood is graded by how many imperfections it has. If the plies were clear with no knots, dents, discolouration, it would be considered as select, #1 or A Grade. If there were plenty of knots and holes it would be lower down on the scale and be called a shop or utility grade. For some people, if they’re working on a project and the appearance is not necessary, they choose a “middle of the road“ grade.

top of page

2.     When was plywood first developed and what is some background history?
True plywood requires at least three layers of veneer stacked so that the grain alternates 90 degrees. The veneers are cross-layered and joined together by an adhesive.

The 1993 Hardwood Plywood Reference Guide, a publication of the Hardwood Plywood & Veneer Association states that, "in 1830, the piano industry became the first North American industry to use plywood. Wood & Wood Products Magazine's Centennial issue (1996) says that, "in 1890, the rotary cutting process was invented," and as a result of mechanization, plywood became increasingly affordable.

In 1929 a pamphlet published by the National Committee on Wood Utilization noted, "Plywood is a modern term describing an old product which did not receive serious technical and economic consideration until its adaptability to airplane and marine consideration was developed during exhaustive tests at the Forest Products Laboratory."

The word "plywood" which was created in America, received official sanction in dictionaries printed a few years later. That's plywood... veneers on the other hand, dated back to the early Egyptians in the times of the Pharaohs... about 4,000 years ago.

top of page

3.     How much does a sheet of plywood weigh?
Plywood weights will vary according to species and even country of origin. A "ball park" number for North American made softwood plywood would be 23 lbs for a 4 x 8 x 1/4" sheet.

top of page

4.     What is the difference between Luan Plywood and regular good-one-side plywood?
Good one side is a recognized grade for Canadian made fir plywood. This panel is obviously made from fir veneer and bonded on exterior grade resins. The face is well sanded, repairs and natural defects (knots, splits, etc) are limited. For further info try the Canadian Plywood Association,
www.canply.org/.  Laun is a term to reference a group of wood species. Laun plywood's come in a variety of grades, some of which are similar to good one side. Launs are usually bonded with interior grad resins and are not equal to fir plywood in structural strength.

top of page

5.     What type of wood and sizes do you offer for scroll saw hobbyists?
The ideal wood for scroll saw work is baltic birch. This special plywood is constructed with more veneers per unit of thickness than other types of plywood. Manufactured in Europe, this panel is ideal for routering, scroll sawing or for applications requiring high stability. Available in 5' x 5' sheets and thickness 1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”.  Prices are from $12.00(1/8) - $60.00 (3/4") per sheet.

top of page

6.     What material would you suggest for the top of a shop work bench? And what thickness?
The inexpensive solution is the thickest MDF available. Traditionally, workbenches in woodworking shops are laminated beechwood.

top of page

 


Make citysoup.ca your homepage
contact us |  about us |  terms of use |  photo credits |  disclaimer |  policies   -   Copyright City of Coquitlam 2008